Angebote zu "Synthesis" (7 Treffer)

Kategorien

Shops

Role of synthesis parameters on nanostructured ...
39,90 € *
ggf. zzgl. Versand

The main purpose of this research work is to develop the single domain magnetic particles of M-type Barium hexa-ferrite having composition of BaFe12O19 using oxide precursors using conventional powder metallurgy technique. The phase formation and magnetic performance of the powders and magnets will be optimized by adjusting calcination and sintering temperatures. The synthesis of M-Type Barium hexa-ferrite carried out in two sections. A series of four samples have been prepared by initial wet mixed powders calcined at different temperatures i.e. 750, 850, 950 and 1050oC. On the basis of structural analysis the sample calcined at 950oC has been selected and further divided into four parts to sintered them at 1100, 1150, 1200 and 1250oC. These are characterized through Differential Scanning calorimetric (DSC), X-ray Diffractometer (XRD), Diamond Structure visualization software, Fourier transform infrared (FTIR), Scanning electron microscope (SEM) and DC-Magnetometer. The structural measurements depict the confirmation of M-Type Barium Hexa-ferrite structure. SEM micrographs show the hexagonal shaped like grains. The coercivity of the sample sintered at 1250oC has a minimum value.

Anbieter: Dodax
Stand: 06.07.2020
Zum Angebot
Nano LaAlO3 & Simulation Comparisons of High K ...
54,90 € *
ggf. zzgl. Versand

The continued scaling of CMOS transistor requires replacement of the conventional silica gate oxide (SiO2) with a higher dielectric constant (K) gate dielectric to minimize the leakage current and to maintain a high capacitance especially at nano level to escape Quantum Mechanical Tunneling. Among many contenders, La2O3 is believed to be the suitable successor but the lanthanide oxides are known to be hygroscopic, which can affect their dielectric quality. Hence, we present a work on mixing the lanthanum oxide (or lanthana) with a less hygroscopic oxide such as Al2O3 to stabilize the insulator layer. Lanthanum Aluminate (LaAlO3) is much less susceptible to moisture. It also combines the advantages of the high dielectric constant of La2O3 and the chemical and thermal stability of Al2O3. Synthesis of Lanthanum Aluminate nano particles is done by Gelation-Precipitation method and are characterized by XRD, PSA, UV-Vis, TG/DTA, SEM, TEM and LCR-meter. The SiO2, La2O3, LaAlO3 are simulated, the reduction in leakage current of MOSFET using nano Silica, nano Lanthana and nano Lanthanum Aluminate insulator is studied using Quantum Wise-Virtual Nano Lab and Nextnano software tools.

Anbieter: Dodax
Stand: 06.07.2020
Zum Angebot
NEODYMIUM SUBSTITUTED Mg-Cd FERRITE MICROSTRIP ...
71,89 € *
ggf. zzgl. Versand

The book includes the remarkable information of use of nano-crystalline Mg-Cd and Nd3+substituted Mg-Cd ferrites as substrates for microstrip patch antenna. The details of ferrites synthesis by oxalate co-precipitation method under microwave sintering were well explained. Overall detailed explanation of results obtained from synthesis, characterization using XRD, FE-SEM, EDAX and FT-IR technique and magnetic properties of ferrite materials was described. The explanation of effect of microwave sintering of structural properties of ferrite was given precisely. The details measurements of permittivity, dielectric loss tangent, permeability, magnetic loss tangent, reflection loss of ferrites were also included. The design of microstrip patch antennas on synthesized ferrite using these electromagnetic parameters with help of Ansoft Designer SV2 software was described. The procedure of fabrication of substrates of ferrite, printing of silver patches on ferrite substrates and connection of SMA connectors at proper locations was given in this book. Finally this book explains information about analysis by simulation and measurements of antenna parameters on vector network analyzer.

Anbieter: Dodax
Stand: 06.07.2020
Zum Angebot
Role of synthesis parameters on nanostructured ...
48,90 CHF *
ggf. zzgl. Versand

The main purpose of this research work is to develop the single domain magnetic particles of M-type Barium hexa-ferrite having composition of BaFe12O19 using oxide precursors using conventional powder metallurgy technique. The phase formation and magnetic performance of the powders and magnets will be optimized by adjusting calcination and sintering temperatures. The synthesis of M-Type Barium hexa-ferrite carried out in two sections. A series of four samples have been prepared by initial wet mixed powders calcined at different temperatures i.e. 750, 850, 950 and 1050oC. On the basis of structural analysis the sample calcined at 950oC has been selected and further divided into four parts to sintered them at 1100, 1150, 1200 and 1250oC. These are characterized through Differential Scanning calorimetric (DSC), X-ray Diffractometer (XRD), Diamond Structure visualization software, Fourier transform infrared (FTIR), Scanning electron microscope (SEM) and DC-Magnetometer. The structural measurements depict the confirmation of M-Type Barium Hexa-ferrite structure. SEM micrographs show the hexagonal shaped like grains. The coercivity of the sample sintered at 1250oC has a minimum value.

Anbieter: Orell Fuessli CH
Stand: 06.07.2020
Zum Angebot
Role of synthesis parameters on nanostructured ...
35,99 € *
ggf. zzgl. Versand

The main purpose of this research work is to develop the single domain magnetic particles of M-type Barium hexa-ferrite having composition of BaFe12O19 using oxide precursors using conventional powder metallurgy technique. The phase formation and magnetic performance of the powders and magnets will be optimized by adjusting calcination and sintering temperatures. The synthesis of M-Type Barium hexa-ferrite carried out in two sections. A series of four samples have been prepared by initial wet mixed powders calcined at different temperatures i.e. 750, 850, 950 and 1050oC. On the basis of structural analysis the sample calcined at 950oC has been selected and further divided into four parts to sintered them at 1100, 1150, 1200 and 1250oC. These are characterized through Differential Scanning calorimetric (DSC), X-ray Diffractometer (XRD), Diamond Structure visualization software, Fourier transform infrared (FTIR), Scanning electron microscope (SEM) and DC-Magnetometer. The structural measurements depict the confirmation of M-Type Barium Hexa-ferrite structure. SEM micrographs show the hexagonal shaped like grains. The coercivity of the sample sintered at 1250oC has a minimum value.

Anbieter: Thalia AT
Stand: 06.07.2020
Zum Angebot
Synthesis and Characterization of Nanothermometer
43,99 € *
ggf. zzgl. Versand

This project is an approach towards the synthesis and characterization of liquid Gallium filled Indium Oxide nanothermometer by using resistive chemical vapor deposition technique. All the measurements and microscopical studies has been presented by using the concepts of different microscopies like XRD/SEM/EDX/HRTEM and related sample characterization software like Pcpdfwin (XRD-Analysis), Origin (Plotting graphs), Image Tool (SEM Images Analysis) and Digital Micrograph (TEM/HRTEM Images Analysis). The growth methods such as resistive heating chemical vapor deposition (RH-CVD) and growth mechanisms such as vapor-liquid-solid (VLS) and vapor solid (VS) of growing nanotubular structures have been discussed in this report. The HRTEM-EDX measurement along the radial direction of an Indium Oxide nanotubular structure explore the in depth knowledge of the flow of liquid Gallium. These similar observations have not been reported by other authors. The synthesis of metal filled Oxide nanotubular structures may have potential applications in future nanofluid devices. It could be ideal for the semiconductor industry and bio medical fields.

Anbieter: Thalia AT
Stand: 06.07.2020
Zum Angebot